KAI SHUN SHARPENING STONE 300-1000

KAI SHUN SHARPENING STONE 300-1000

Kai Shun whetstone sharpening stone with double 300/1000 grit and support, Offers a fine face to set the edge of the knife edge. With this stone you can always have your knives sharp and ready for use.

KAI SHUN 300/1000 STONE CHARACTERISTICS:

- Dimensions 18.4 x 6.2 x 2.8 cm

- Height: 2.8 cm

- Width: 6.2 cm

- Depth: 18.4 cm

INSTRUCTIONS FOR USE:

- Before using, immerse the stone completely in the water for about 10 or 15 minutes. Always leave a thin film of water on the stone during the sharpening process.

- For single bevel knives, first place the face of the edge on the sharpening stone, maintaining the manufacturer's predetermined angle of 45° (for the best possible surface) with light pressure on the edge forward and reduce the pressure on the edge in the direction of return. After having sharpened the knife on one side, repeat the sharpening operation approximately 1 to 10 times in relation to the beveled side.

- For knives sharpened on both sides, the same procedure is carried out as for single-edged knives, but with an angle of approximately 15°. It is very important to sharpen both sides identically in order to obtain a symmetrically sharpened blade.